产品说明:

Micro-Density 电话接入网关（PSTN Gateway） + ATA 套餐方案

The SPA-3000 continues to deliver on Sipura Technologys mission to provide market leading, best-in-class VoIP end points providing freedom and opportunity to service providers and end users. The SPA-3000 features VoIP adapter functionality found in the SPA-2000 and SPA-1000/1 with the additional benefit of an integral connection for legacy telephone network hop-on, hop-off applications. SPA-3000 users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to a VoIP service provider and vice versa. A typical user calling from a land line or mobile phone will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA-3000 via a local phone number or by using a telephone connected directly to the unit. The advanced authentication and call routing intel-ligence programmed into the SPA-3000 will connect the caller via the Internet to the far end destination with security and ease. Using the SPA-3000 at the far end, calls can be answered immediately or further processed as a local call to any legacy land line or mobile phone allowed by the SPA-3000 dial plan.

If power and/or IP network connectivity is lost to the unit or the VoIP service is down, calls can be sent to a traditional carrier via the FXO interface.

SPA-3000 电话特征:

• VoIP to PSTN (USA) Service Call Origination and Termination
• PSTN (USA) to VoIP Service Call Origination and Termination
• Single or Dual Stage Dialing
• Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
• Per Call Authentication and Associated Routing
• Least Cost Routing Support
• Terminating Impedance Agnostic – 8 Configurable Settings
• Call Waiting, Cancel Call Waiting
• Caller ID Detection (Bellcore Type 1)
• Caller ID with Name/Number (Multinational Varients) Display
• Caller ID Blocking
• Call Waiting Caller ID with Name/Number
• Call Forwarding to PSTN or VoIP Service: No Answer/Busy/All
• Do Not Disturb
• Call Transfer
• Three-Way Conference Calling with Local Mixing
• Message Waiting Indication – Visual and Tone Based
• Call Return and Call Back on Busy
• Call Blocking with Toll Restriction
• Distinctive Ringing
• Off-Hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot Line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
• Forward Calls to VoIP service – Selective, Authenticated, All
• Forward Calls to PSTN service – Selective, Authenticated, All
• PSTN Line Sharing with Multiple Extensions
• Automatic PSTN Fallback (Loss of Power or IP Service to Unit – with Quiescence to Normal Operations)
• Advanced Inbound and Outbound Call Routing
• Single Stage and Two Stage Dialing
• Independent Configurable Dial Plans – Up to 8
• Force PSTN Disconnection
• Sequential Dialing Support
  
  VoIP to PSTN Authentication and Routing
  • VoIP to PSTN Gateway Enable/Disable
  • VoIP Caller Auth Method (None, PIN, HTTP Digest)
  • VoIP PIN Max Retry Setting
  • One Stage Dialing Enable/Disable
  • VoIP Caller ID Pattern Matching
  • VoIP Access Allowed Caller List (No Further Authentication)
  • VoIP Caller PIN and Associated Dial Plan
    

  PSTN to VoIP Authentication and Features
  

  • PSTN to VoIP Gateway Enable/Disable
  • Caller Auth Method: None, PIN, Caller ID
  • Ring Through to FXS Enable/Disable
  • Ring Through Tone – Configurable
  • Caller ID (Bellcore 1) for VoIP Service Access
  • Caller ID Enable/Disable
  • PIN Max Retry Settings
  • Access Allowed Caller List (No Further Authentication)
  • Caller PIN and Associated Dial Plan
  • Least Cost Routing (via Outbound VoIP – Line1 Dial Plan)
    

  FXO 性能(FXO Behavior)
  

  • VoIP Answer Delay Timer
  • PSTN Answer Delay Timer
  • VoIP PIN Digit Time-Out Timer
  • PSTN PIN Digit Time-Out Timer
  • PSTN-to-VoIP Call Max Dur Timer
  • VoIP-to PSTN Call Max Dur Timer
  • PSTN Ring Through Delay Timer
  • PSTN Dialing Delay Timer
  • VoIP DIG Refresh Interval Timer
  • PSTN Ring Time-out Timer
    

  PSTN Disconnection Detection
  

  • CPC (Removal of Tip/Ring Voltage Momentarily)
  • Polarity Reversal
  • Long Silence (Confugrable Time Setting)
  • Disconnect Tone (e.g. Reorder Tone)
  • FXO Port Impedance – Configurable to 16 settings
  • Ring Frequency – Configurable
  • SPA to PSTN and PSTN to SPA Gain Settings
  • Ring Frequency – Maximum Setting
  • Ring Validation Time Setting
  • Tip/Ring Voltage Adjustment Setting
  • Ring Indication Delay Setting
  • Operational Loop Current Minimum Value
  • Ring Time-out Setting
  • On-Hook Speed Setting
  • Ringer Impedance Setting
  • Line-in-Use Voltage Setting

  法规遵循( Regulatory Compliance)

  • FCC (Part 15 Class B and Part 68) , CE , ICES-003

  安全(Security)

  • Password Protected System Reset to Factory Default
  • Password Protected Admin and User Access Authority
  • Provisioning/Configuration/Authentication:
  • HTTP Digest – Encrypted Authentication via MD5 (RFC 1321)
  • Up to 256-bit AES Encryption
    

  
  Documentation

  • Quick-Start Installation and Configuration Guide
  • User Guide
  • Administration Guide – Service Providers Only
  • Provisioning Guide – Service Providers Only

  包装内容(Package Contents)

  • 1 – SPA3000 Phone Adapter Unit
  • 1 – 5v Power Adapter
  • 1 – RJ45 Ethernet Cable
  • 1 – RJ11 Telephone Cable

  尺寸规格(Dimensions:) 4.05 x 1.1. x 3.75 in (102.87 x 27.94 x 95.25 mm) W x H x D
  单位重量(Unit Weight): 2.15 lb (0.975 kg)
  运行温度(Operating Temp).: 32~113F (0~45C)
  储存温度(Storage Temp): -13F~185F (-25~85C)
  工作湿度(Operating Humidity): 10~90% Non-condensing
  储存湿度(Storage Humidity): 10~90% Non-condensing

  数据网络(Data Networking)

  • MAC Address (IEEE 802.3)
  • IPv4 – Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
  • ARP – Address Resolution Protocol
  • DNS – A Record (RFC 1706), SRV Record (RFC 2782)
  • DHCP Client – Dynamic Host Configuration Protocol (RFC 2131)
  • ICMP – Internet Control Message Protocol (RFC792)
  • TCP – Transmission Control Protocol (RFC793)
  • UDP – User Datagram Protocol (RFC768)
  • RTP – Real Time Protocol (RFC 1889) (RFC 1890)
  • RTCP – Real Time Control Protocol (RFC 1889)
  • DiffServ (RFC 2475), Type of Service – TOS (RFC 791/1349)
  • SNTP – Simple Network Time Protocol (RFC 2030)
    

  
  语音网关(Voice Gateway)

  • SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
  • SIP Proxy Redundancy – Dynamic via DNS SRV, A Records
  • Re-registration with Primary SIP Proxy Server
  • SIP Support in Network Address Translation Networks – NAT (incl. STUN)
  • Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
  • Codec Name Assignment

  Voice 算法(Algorithms 算法)

  • G.711 (A-law and μ-law),
  • G.726 (16/24/32/40 kbps),
  • G.729 A,
  • G.723.1 (6.3 kbps, 5.3 kbps)
  • Dynamic Payload
  • Adjustable Audio Frames per Packet

  Fax 性能(Fax Capability)

  • Fax Tone Detection and Pass-Through (Using .711)
  • DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
  • Flexible Dial Plan Support with Interdigit Timers and IP Dialing
  • Call Progress Tone Generation
  • Jitter Buffer – Adaptive
  • Frame Loss Concealment
  • Full Duplex Audio
  • Echo Cancellation (G.165/G.168)
  • VAD – Voice Activity Detection with Silence Suppression
  • Attenuation / Gain Adjustments
  • Flash Hook Timer
  • MWI – Message Waiting Indicator Tones
  • VMWI – Visual Message Waiting Indicator via FSK
  • Polarity Control
  • Hook Flash Event Signaling
  • Caller ID Generation (Name & Number) – Bellcore, DTMF, ETSI
  • Music on Hold Client
  • Streaming Audio Server – up to 10 sessions

  Provisioning, Administration & Maintenance:

  • Web Browser Administration & Configuration via Integrated Web Server
  • Telephone Key Pad Configuration with Interactive Voice Prompts
  • Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
  • Asynchronous Notification of Upgrade Availability via SIP NOTIFY
  • Non-intrusive, In-Service Upgrades
  • Report Generation & Event Logging
  • Stats in BYE Message
  • Syslog & Debug Server Records – Per Line Configurable

  物理接口(Physical Interfaces):

  • 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
  • 1 RJ-11 FXS Phone Ports – For Analog Circuit Telephone Device (Tip/Ring)
  • 1 RJ-11 FXO Phone Ports – For a Telco or PBX Connection

  FXS: Subscriber Line Interface Circuit (SLIC):

  • Ring Voltage: 40-55 VRMS Configurable l*
  • Ring Frequency: 10 Hz – 40 Hz l*
  • Ring Waveform: Trapezoidal and Sinusoida l*
  • Maximum Ringer Load: 3 REN
  • On-hook/off-hook Characteristics:
  • On-hook voltage (tip/ring): -50 V NOMINAL
  • Off-hook current: 25 mA min
  • Terminating Impedance: 8 Configurable Settings including
  • North America 600 ohms, European CTR21

  供电（Power supply）:

  • DC Input Voltage: +5 VDC at 2.0 A Max.
  • Power Consumption: 5 Watts
  • Switching Type (100-240v) Automatic
  • Power Adapter: 100-240v – 50-60Hz (26-34VA) AC Input, 1.8m cord