DD-WRT v24-sp2 mini (c) 2009 NewMedia-NET GmbH
Release: 11/25/09 (SVN revision: 13309)

DD-WRT login: root
Password:
==========================================================

 ____  ___    __        ______ _____         ____  _  _
 | _ \| _ \   \ \      / /  _ \_   _| __   _|___ \| || |
 || | || ||____\ \ /\ / /| |_) || |   \ \ / / __) | || |_
 ||_| ||_||_____\ V  V / |  _ < | |    \ V / / __/|__   _|
 |___/|___/      \_/\_/  |_| \_\|_|     \_/ |_____|  |_|

                       DD-WRT v24-sp2
                   http://www.dd-wrt.com

==========================================================
BusyBox v1.13.4 (2009-11-25 18:39:42 CET) built-in shell (ash)
Enter ‘help’ for a list of built-in commands.

root@DD-WRT:~# nvram show |grep vlan
vlan0ports=0 1 2 3 5*
port5vlans=0 1 16
port3vlans=0
port1vlans=0
wl0_vlan_prio_mode=off
wan_ifname2=vlan1
pppoe_wan_ifname=vlan1
lan_ifnames=vlan0 eth1 eth2 eth3
pppoe_ifname=vlan1
wan_default=vlan1
wan_ifnames=vlan1
vlan1hwname=et0
vlan1ports=4 5u
port4vlans=0
vlans=0
port2vlans=0
port0vlans=1
wan_ifname=vlan1
landevs=vlan0 wl0
dtag_vlan8=0
vlan0hwname=et1
size: 21502 bytes (11266 left)
root@DD-WRT:~#

CFE启动信息：

Decompressing……….done                          
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)                                            
Build Date: Fri Dec 12 18:04:14 CST 2008 (joan@mochow)                                                     
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.                                                      

Initializing Arena                 
Initializing Devices.                    
Boot partition size = 131072(0×20000)                                    
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0                                                               
CPU type 0×29029: 240MHz                       
Total memory: 32768 KBytes                         

Total memory used by CFE:  0×80700000 – 0x80798F60 (626528)                                                          
Initialized Data:          0x8072FFE0 – 0×80732740 (10080)                                                         
BSS Area:                  0×80732740 – 0x80732F60 (2080)                                                        
Local Heap:                0x80732F60 – 0x80796F60 (409600)                                                          
Stack Area:                0x80796F60 – 0x80798F60 (8192)                                                        
Text (code) segment:       0×80700000 – 0x8072FFE0 (196576)                                                          
Boot area (physical):      0×00799000 – 0x007D9000                                                 
Relocation Factor:         I:00000000 – D:00000000                                                 

Device eth0:  hwaddr 5C-33-8E-5F-3C-0D, ipaddr 192.168.1.1, mask 255.255.255.0                                                                             
        gateway not set, nameserver not set                                          
Max TRX Image Supported: 0xFA0000                                
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)                                                     
Loading: Failed.               
Could not load :: Timeout occured                                
Booting from secondary boot partition                                    
Loader:raw Filesys:raw Dev:flash2.trx1 File:0x1c Options:(null)                                                              
Loading: .. 3856 bytes read                          
Entry at 0×80001000                  
Closing network.               
Starting program at 0×80001000                             
CPU ProcId is: 0×00029029, options: 0x0000004d                                             
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4256 Wed No                                                                               
v 25 18:41:16 CET 2009                     
Setting the PFC to its default value                                   
Determined physical RAM map                        
 memory: 02000000 @ 00000000 (usable)                                    
On node 0 totalpages: 8192                         
zone(0): 8192 pages.                   
zone(1): 0 pages.                
zone(2): 0 pages.                
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd cons                                                                               
ole=ttyS0,115200               
CPU: BCM5354 rev 3 at 240 MHz                            
Using 120.000 MHz high precision timer.                                      
Calibrating delay loop… 239.20 BogoMIPS                                        
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)                                                            
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)                                                           
Mount cache hash table entries: 512 (order: 0, 4096 bytes)                                                         
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)                                                           
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)                                                          
Checking for ‘wait’ instruction…  unavailable.                                               
POSIX conformance testing by UNIFIX                                  
PCI: no core           
PCI: Fixing up bus 0                   
Initializing RT netlink socket                             
Starting kswapd              
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)                                                            
devfs: boot_options: 0×1                       
squashfs: version 3.0 (2006/03/15) Phillip Lougher                                                 
pty: 256 Unix98 ptys configured                              
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHAR                                                           
abled    
ttyS00 at 0xb8000300 (irq = 3) is a 16550A                                         
ttyS01 at 0xb8000400 (irq = 3) is a 16550A                                         
PCI: Setting latency timer of device 00:01.0 to 64                                                 
PCI: Setting latency timer of device 00:05.0 to 64                                                 
sb_doattach: incoming bus is PCI but it’s a lie, switching to SB devid:0×4318                                                                            
PCI: Setting latency timer of device 00:06.0 to 64                                                 
sb_doattach: incoming bus is PCI but it’s a lie, switching to SB devid:0×4719                                                                            
PPPoL2TP kernel driver, V0.13                            
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky                                                                 
Physically mapped flash: Found an alias at 0×1000000 for the chip at 0×0                                                                       
 Amd/Fujitsu Extended Query Table v1.3 at 0×0040                                               
number of CFI chips: 1                     
cfi_cmdset_0002: Disabling fast programming due to code brokenness.                                                                  
Flash device: 0×1000000 at 0x1c000000                                    
bootloader size: 131072                      
Physically mapped flash: Filesystem type: squashfs, size=0x245e37                                                                
partition size = 2469888                       
Creating 5 MTD partitions on “Physically mapped flash”:                                                      
0×00000000-0×00020000 : “cfe”                            
0×00020000-0x00fe0000 : “linux”                              
0×00125000-0×00380000 : “rootfs”                               
mtd: partition “rootfs” doesn’t start on an erase block boundary — force read-o                                                                               
nly  
0x00fe0000-0×01000000 : “nvram”                              
0×00380000-0x00fe0000 : “ddwrt”                              
sflash not supported on this router                                  
Initializing Cryptographic API                             
IP Protocols: ICMP, UDP, TCP, IGMP                                 
IP: routing cache hash table of 512 buckets, 4Kbytes                                                   
TCP: Hash tables configured (established 2048 bind 4096)                                                       
ip_conntrack version 2.1 (512 buckets, 4096 max) – 336 bytes per conntrack                                                                         
ip_tables: (C) 2000-2002 Netfilter core team                                           
ipt_random match loaded                      
netfilter PSD loaded – (c) astaro AG                                   
ipt_osf: Startng OS fingerprint matching module.                                               
ipt_IPV4OPTSSTRIP loaded                       
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.                                                  
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>                                                            
All bugs added by David S. Miller <davem@redhat.com>                                                   
VFS: Mounted root (squashfs filesystem) readonly.                                                
Mounted devfs on /dev                    
start service            
starting Architecture code for broadcom                                      
Booting device: Linksys WRT54G/GL/GS                                   
loading sysinit              
boardflags are 0×0750                    
sh: can’t create /proc/switch/eth1/reset                                     
sh: can’t create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent director                                                                               
y
eth1: Operation not supported                            
wl0.1: No such device                    
wl0.2: No such device                    
wl0.3: No such device                    
eth1: Invalid argument                     
eth1: Invalid argument                     
eth1: Operation not supported                            
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
eth1: Bad address
Setting SSID “linksys”
Key is a RSA key
Wrote key to ‘/tmp/root/.ssh/ssh_host_rsa_key’
Key is a DSS key
Wrote key to ‘/tmp/root/.ssh/ssh_host_dss_key’
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded