DD-WRT v24-sp2 mini (c) 2009 NewMedia-NET GmbH
Release: 11/25/09 (SVN revision: 13309)
DD-WRT login: root
Password:
==========================================================
____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
DD-WRT v24-sp2
http://www.dd-wrt.com
==========================================================
BusyBox v1.13.4 (2009-11-25 18:39:42 CET) built-in shell (ash)
Enter ‘help’ for a list of built-in commands.
root@DD-WRT:~# nvram show |grep vlan
vlan0ports=0 1 2 3 5*
port5vlans=0 1 16
port3vlans=0
port1vlans=0
wl0_vlan_prio_mode=off
wan_ifname2=vlan1
pppoe_wan_ifname=vlan1
lan_ifnames=vlan0 eth1 eth2 eth3
pppoe_ifname=vlan1
wan_default=vlan1
wan_ifnames=vlan1
vlan1hwname=et0
vlan1ports=4 5u
port4vlans=0
vlans=0
port2vlans=0
port0vlans=1
wan_ifname=vlan1
landevs=vlan0 wl0
dtag_vlan8=0
vlan0hwname=et1
size: 21502 bytes (11266 left)
root@DD-WRT:~#
CFE启动信息：
Decompressing……….done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Dec 12 18:04:14 CST 2008 (joan@mochow)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 131072(0×20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
CPU type 0×29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0×80700000 – 0x80798F60 (626528)
Initialized Data: 0x8072FFE0 – 0×80732740 (10080)
BSS Area: 0×80732740 – 0x80732F60 (2080)
Local Heap: 0x80732F60 – 0x80796F60 (409600)
Stack Area: 0x80796F60 – 0x80798F60 (8192)
Text (code) segment: 0×80700000 – 0x8072FFE0 (196576)
Boot area (physical): 0×00799000 – 0x007D9000
Relocation Factor: I:00000000 – D:00000000
Device eth0: hwaddr 5C-33-8E-5F-3C-0D, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Max TRX Image Supported: 0xFA0000
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Booting from secondary boot partition
Loader:raw Filesys:raw Dev:flash2.trx1 File:0x1c Options:(null)
Loading: .. 3856 bytes read
Entry at 0×80001000
Closing network.
Starting program at 0×80001000
CPU ProcId is: 0×00029029, options: 0x0000004d
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4256 Wed No
v 25 18:41:16 CET 2009
Setting the PFC to its default value
Determined physical RAM map
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd cons
ole=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop… 239.20 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for ‘wait’ instruction… unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0×1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHAR
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it’s a lie, switching to SB devid:0×4318
PCI: Setting latency timer of device 00:06.0 to 64
sb_doattach: incoming bus is PCI but it’s a lie, switching to SB devid:0×4719
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0×1000000 for the chip at 0×0
Amd/Fujitsu Extended Query Table v1.3 at 0×0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0×1000000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x245e37
partition size = 2469888
Creating 5 MTD partitions on “Physically mapped flash”:
0×00000000-0×00020000 : “cfe”
0×00020000-0x00fe0000 : “linux”
0×00125000-0×00380000 : “rootfs”
mtd: partition “rootfs” doesn’t start on an erase block boundary — force read-o
nly
0x00fe0000-0×01000000 : “nvram”
0×00380000-0x00fe0000 : “ddwrt”
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) – 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded – (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
start service
starting Architecture code for broadcom
Booting device: Linksys WRT54G/GL/GS
loading sysinit
boardflags are 0×0750
sh: can’t create /proc/switch/eth1/reset
sh: can’t create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent director
y
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
eth1: Bad address
Setting SSID “linksys”
Key is a RSA key
Wrote key to ‘/tmp/root/.ssh/ssh_host_rsa_key’
Key is a DSS key
Wrote key to ‘/tmp/root/.ssh/ssh_host_dss_key’
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
）
